EN62133: 2013 revision standard revision
Between the new version of the standard and the old standard between the following major technical differences, mainly for the following four.
1, the revision of the battery pack used in the battery assembly requirements (Article 5.6)
For the installation of multiple battery packs in a battery case, each battery pack must have independent control and
Protect the line.
2, to increase the lithium battery design recommendations (Article 5.6.2);
For the installation of multiple battery packs in a battery case, each battery pack must have independent control and
Protect the line.
3, the distinction between nickel batteries and lithium batteries test requirements (Article 6);
Nickel batteries to meet the requirements of Article 7; lithium battery to meet the requirements of Article 8.
4, to increase the lithium battery specific test requirements (Article 8); Article 8.1.2 Second procedure
The new charging step requires the battery to be charged at the maximum and minimum charge temperatures.
